MCU 1100
| Maximum x-axis range of this machine | 1100 |
| Maximum y-axis range of this machine | 1550 |
| Maximum z-axis range of this machine | 1000 |
| Maximum spindle speed of this machine | 24000 |
Specificaties
| MCU | MCU | Spindles // Spindeln | Type // Bezeichnung | POWER PLUS | POWER | SPEED | SPEED | SPRINT | RAPID | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1100V-5X | 1100VT-5X | Drive type // Antriebstyp | Direkt // Diretto | Direkt // Diretto | Direkt // Diretto | Direkt // Diretto | Direkt // Diretto | Direkt // Diretto | ||||||
| Maximum workpiece diameter // Max werkstuk diameter | mm | Ø 1 250 | Taper – Universal // Spindelkegel | ISO 50 [HSK-A100] | ISO 50 [HSK-A100] | ISO 40 | HSK-A63 | HSK-A63 | HSK-A63 | |||||
| Maximum workpiece height // Maximale werkstukhoogte | mm | 1 000 | Multitasking Variant // Multitaskuitvoering | Yes // Ja | No // Nein | No // Nein | Yes // Ja | Yes // Ja | No // Nein | |||||
| Distance spindle to table // Afstand spindel tot tafel | mm | 150 – 1 150 | Taper – Multitasking // Spindelkegel multifunctionaliteit 3500 | HSK-A100 | - | - | HSK-A63 | HSK-A63 | - | |||||
| X axis travel // X as | mm | 1 100 | Hydraulic Spindle Lock // Hydraulisch spindelslot | Yes // Ja | - | - | Yes // Ja | Yes // Ja | - | |||||
| Y axis travel // Y as | mm | 1 550 | Max. speed // Maximale snelheid | min-1 | 10 000 | 10 000 | 12 000 | 12 000 | 18 000 | 24 000 | ||||
| Z axis travel // Z as | mm | 1 000 | Nominal speed // Nominale snelheid | min-1 | 850 | 720 | 2 000 | 2 330 | 2 800 | 4 000 | ||||
| Rapid traverse X, Y, Z // Ijlgang x, y, z -as | mm.min-1 | 50 000 | Power // Aandrijfkracht | 25% / 40% ED continuous // Dauer | kW | 59 / 50 / 39 | 42 / 36 / 20 | 53 / 45 / 33 | 56 / 48 / 32 | 29 / 25 / 20 | 29 / 25 / 19 | |||
| Acceleration in axes X, Y, Z // X, Y, Z acceleratie | m.s-2 | 5 | Torque // Koppel | 25% / 40% ED continuous // Dauer | Nm | 654 / 579 / 451 | 384 / 340 / 262 | 243 / 215 / 160 | 226 / 200 / 130 | 153 / 135 / 87 | 113 / 100 / 60 | |||
| Feed force X, Y, Z // X, Y, Z koppel | kN | 16 / 16 / 16 | ||||||||||||
| Positioning accuracy // Positioneringsprecisie | mm | 0.008 | ||||||||||||
| Repeatability // Herhaalbaarheid | mm | 0.004 | ||||||||||||
| A axis tilt range // A-as zwenkbereik | 175° (+45° / –130°) | |||||||||||||
| A axis maximum speed // A-as topsnelheid | min-1 | 23 | ||||||||||||
| Accuracy of dividing A axis // A-as precisie | sec | ±2 | ||||||||||||
| Accuracy of dividing C axis // C-as precisie | sec | ±2 | ±1 | |||||||||||
| Table clamping area size // Tafelgrootte | mm | Ø 1 150 × 900 | Ø 1 200 | |||||||||||
| Maximum load on the table // Max tafelbelasting | kg | 2 200 | 1 700 | |||||||||||
| Maximum speed // Maximale snelheid | min-1 | 80 | 500 | |||||||||||
| Nominal speed // Nominale snelheid | min-1 | 23 | 256 | |||||||||||
| Torque // Koppel | Nm | 3 194 | 3 030 | |||||||||||
| Power | kW | 28 | 88 | |||||||||||
| T-slots (aantal × breedte × afstand) | mm | 7 × 22H7 × 125 | 10 × 22H7 × 36° | |||||||||||
| AC voltage // Spanning | 3 × 400V, 50Hz | |||||||||||||
| Rated current // Amperage | A | 250 | ||||||||||||
| Total machine input // Totaal vermogen | kVA | 120 | ||||||||||||
| Recommended power line supply // Aanbevolen stroomvoorziening | mm2 | 5 × 95 Cu | ||||||||||||
| Pneumatic pressure // Werkluchtdruk | MPa | 0.6 | ||||||||||||
| Compressed air consumption // Compressor luchtverbruik | m3/hod | 8 - 20 | ||||||||||||
| Length (transport dimensions) // Lengte (transport) | mm | 6 500 (5 000) | ||||||||||||
| Width (transport dimensions) // Breedte (transport | mm | 4 800 (2 680) | ||||||||||||
| Height (transport dimensions) // Hoogte (transport) | mm | 5 000 (3 600) | ||||||||||||
| Machine weight // Gewicht (Transport) | kg | 35 000 (30 000) | ||||||||||||
| X-as | |
|---|---|
| Y-as | |
| Z-as | |
| Spindeltoerental | |
| Besturing | |
| Type machine |
