G700
| Maximum x-axis range of this machine | 750 |
| Maximum y-axis range of this machine | 600 |
| Maximum z-axis range of this machine | 500 |
| Maximum spindle speed of this machine | 20000 |
Brochure
1493880656_8754Specifications
| Items | Unit | G700 |
|---|---|---|
| Travel | ||
| X axis | mm | 750 |
| Y axis | mm | 600 |
| Z axis | mm | 500 |
| Distance from spindle nose to table | mm | 150 - 650 |
| Distance between columns | mm | 850 |
| Table | ||
| Dimension | mm | 810 x 620 |
| Max. load | kg | 500 |
| T-slot （width x pitch x number） | mm | 18 x 125 x 5 |
| Spindle | ||
| Spindle type | - | Built-in |
| Spindle speed | rpm | 20000 |
| Motor power （cont./15 min rated） | kW | 18.5 / 22 MITSUBISHI |
| Spindle taper | - | HSK63A |
| Feed Rate | ||
| Rapid traverse（X / Y / Z） | m/min | 32 / 32 / 32 |
| Cutting feed rate | mm/min | 20000 |
| Motor power （X / Y / Z） | kW | 3.5/3.5/3.5 MITSUBISHI |
| ATC | ||
| ATC type | - | Umbrella |
| Magazine capacity | pcs | 16T |
| Max. tool diameter / next pocket empty | mm | 105 / 120 |
| Max. tool length | mm | 250 |
| Max. tool weight | kg | 3 |
| Tool shank | - | HSK63A |
| Space & System Requirement | ||
| Pneumatic pressure | kgf/cm² | 6 |
| Electrical power consumption | kVA | 50 |
| Machine net weight | kg | 7000 |
| Max. floor space （W x L x H） | mm | 3950 x 4600 x 2950 |
| MORE |
| X-axis travel | |
|---|---|
| Y-axis travel | |
| Z-axis travel | |
| Control system | |
| Spindeltoerental |
