U800
| Maximum x-axis range of this machine | 800 |
| Maximum y-axis range of this machine | 1150 |
| Maximum z-axis range of this machine | 750 |
| Maximum spindle speed of this machine | 20000 |
Brochure
takumi u series catalogSpecifications
| Modell | U 800 |
|---|---|
| Travels | |
| X-Axis (mm) | 800 |
| Y-Axis (mm) | 1150 |
| Z-Axis (mm) | 750 |
| A-Axis (°) | +/- 120 |
| C-Axis (°) | 360 |
| Table | |
| Distance from spindle nose to table (mm) | 125 - 875 |
| Distance between columns (mm) | 980 |
| Table working surface W x D (mm) | 800 |
| Load max. (uniform distribution) (kg) | 1000 |
| T-Slots (DIN 650) | 7 x 14mm x 100mm |
| Spindle | |
| Type | HSK63-A |
| Propulsion method | Direkt |
| Spindle Speed (rpm) | 15000 |
| Power in kW (cont. 30 min.) | 10 / 12,5 |
| Spindle Taper | 64 / 79 |
| Feed Rate | |
| Rapid Traverse X/Y/Z-Axis (m/min) | 48 |
| Cutting Feed Rate X/Y/Z-Axis (mm/min) | 24000 |
| Rapid Traverse A/B/C-Axis (1/min) | 80 / - / 100 |
| Cutting Feed Rate A/B/C-Axis (1/min) | 80 / - / 100 |
| ATC & Magazine | |
| ATC Type | Kette |
| Magazine Capacity | 32 |
| Maximum Tool Diameter (mm) full / next pocket empty | 90 |
| With Empty Pockets (mm) | 125 |
| Maximum Tool Length (mm) | 300 |
| Maximum Tool Weight (kg) | 7 |
| Space & System Requirements | |
| Air Requirements (bar) | 6 |
| Electrical Power Consumption (kVA / A) | 80 / 160 |
| Machine Net Weight (kg) | 22000 |
| Maximum Floor Spade (mm) W x L x H | 5.780 x 5.210 x 3.980 |
| Modell | U 800 |
